Small rust spots on steel gutters may be repairable, while widespread corrosion usually means replacement. Call the number on this page to be connected with a local gutter company in Lyons.

Steel compared with aluminum
Aluminum is lighter and will not rust but dents easily. Steel is heavier, harder to dent and bends less under snow. It is also less forgiving of neglect, because a scratch through the coating can start rust. Many owners pick steel for toughness and accept the extra care.
Seams, joints and sealing
Many steel systems are sectional, joined with sealant and rivets, though seamless steel is available from some crews. Joints are the weak spot, since they can open or let moisture reach bare edges. Ask how seams are made, which sealant is used and how the ends are capped.
Repair or replace, in cost terms
Touching up a rust spot, resealing a joint or swapping one damaged section is inexpensive compared with a new run. But widespread rust, soft fascia or sagging along most of the length makes repeated patches a poor bet. A local company can compare both routes.
Before you call in Lyons
Ask whether your job needs a permit. Gutter swaps usually don't, while a re-roof or new framing typically does, and the local building office has the final word.
Snow load matters for gutters here. Hidden hangers spaced closer together hold up better under ice and slush than old spikes do.
Much of the metro sits on clay soils that swell when wet, so downspouts should carry water well away from the foundation.
Hail is a regular part of summer along the Front Range. Dented gutters and downspouts are often among the first things an adjuster notes after a storm.
Because Lyons is farther from the core of the metro, scheduling can take a little longer and some companies add a trip charge; ask when you call.
Nearby, the same kind of help is available in Longmont, Niwot and Berthoud.
Wind and storms
Steel gutters resist flexing in strong gusts, but a loose run can still pull away and tear fascia as it goes. Check that hangers are tight and that corners are secure. After a big wind or hail event, a quick look from the ground is worth the time.
Treating small rust spots
Light surface rust on a sound gutter can often be cleaned and touched up by the installer with a compatible coating. That helps when the metal is still solid. If you can poke through it or see flaking along a joint, the damage is deeper than the surface.
Steel Gutters questions in Lyons
Are steel gutters heavier than aluminum?
Are steel gutters good for barns and shops?
Can rusted steel gutters be repaired?
What should I ask a steel gutter company?
More gutter repair services in Lyons
Steel Gutters nearby
Helpful guides
Sources
Last updated: