Steel gutters are stronger and dent less than aluminum, which is why they appeal to owners with hail, heavy snow or hard-use buildings. The trade-off is that steel can rust if its coating is scratched or worn. Call the number on this page to be connected with a local gutter company in Longmont.

Why choose steel
Steel is the strong option among common gutter metals. It resists dents from hail and from a ladder leaned against the edge, and it holds a straight line over long spans. For owners who have already replaced dented aluminum once, that toughness is the whole appeal, and it explains the choice.
Fascia and drip edge
The board behind a steel gutter has to hold more weight, so soft or rotted fascia should be repaired first. A good company also checks the drip edge so water does not slip behind the metal. Treat that carpentry as part of the job, not an extra.
Permits, snow and drainage in Longmont
Permits for work on Longmont homes are handled by the Longmont Building Inspection Division. If the job grows into roofing, fascia framing or structural repair, confirm who pulls the permit before work starts.
On permits, the City of Longmont notes this: A permit is required to reroof, except repairs replacing less than 100 square feet of the roof; the guide does not mention gutters.
Snow load matters for gutters here. Hidden hangers spaced closer together hold up better under ice and slush than old spikes do.
Much of the metro sits on clay soils that swell when wet, so downspouts should carry water well away from the foundation.
Summer hailstorms hit this area often, and dents in gutters can be useful evidence when a roof is inspected for storm damage.
Companies that take calls here usually also work in Frederick, Niwot and Firestone.
Measuring the job
The estimator will walk the perimeter, count corners and outlets and note heights and access. Gauge, gutter size and downspout count then turn into a number. Because steel is heavy, tall or hard-to-reach walls take more labor. Being home to point out trouble spots helps the quote.
| Weather | What steel does |
|---|---|
| Hail | Resists dents, paint may chip |
| Heavy snow | Stays stiff, loads hangers |
| Temperature swings | Moves less than other metals |
| Moisture | Rusts where coating fails |
How exposed a house is changes how hard each of these hits, so open lots and sheltered blocks age differently under the same storm.
Repair or replace steel gutters
- Repair: a few rust spots, a loose hanger, a leaking joint
- Replace: rust through the trough bottoms
- Replace: fascia too soft to hold new hangers
A local company can look at yours, check the fascia and the metal, and say which route fits the house.
Around Longmont
Calls come in from across Longmont, including around U.S. Highway 287 (Main Street), State Highway 119, Downtown Main Street.
Steel Gutters questions in Longmont
What is the difference between galvanized and Galvalume gutters?
How long do steel gutters last?
Can I paint steel gutters?
Can steel gutters handle heavy snow?
More gutter repair services in Longmont
Steel Gutters nearby
Helpful guides
Sources
Last updated: